It is for this reason that companies invest in technologies such as anti-scratch coating for plastics that can improve performance and reliability of these products.
Polycarbonate is a versatile and reliable polymer. This is due to its superior physical and chemical properties.
However, it is not 100% perfect. At times, you need to add other products to make it a perfect choice for a specific application.
There are a number of steps you have to follow to achieve the required degree of safety.
Scratches or marks on safety goggles and face shields impair vision. As a result, one has to strain to see through these safety equipment.
This makes it prudent to find a way of eliminating all scratches without interfering with the desired qualities of the safety gears. Remember, eye strain can be devastating. As a matter of fact, you may not be able to focus on the work at hand.
In short, you have no option but, to go for safety gears with anti-scratch coating. It is the only sure way of improving performance and reliability of this equipment.
An anti-scratch coating for plastics are chemical substrates that bind on polycarbonate or acrylic sheet. The process involves dip or flow coating. After which, the coating substrate is cured through UV or thermal energy.
With this, the anti-scratch coating firmly attaches on the polycarbonate or acrylic surface. This creates a surface that is wear resistance.
Normally, this film is so thin that it does not interfere with the degree of light transmission. It is 99.9% transparent. This is based on turbidimeter test results. Of course, this also complies with the ASTM test standards.
Of course, with all these, goggles or face shield will guarantee safety at all times.
There are different types of plastic coating formulated for different working conditions. There are different environmental conditions that may affects our eyes. Therefore, we need to be cautious all the time.
These environmental conditions may include:
This implies, any safety gear should filter or prevent all these to consider it safe. Of course, there is no single technology that can eliminate all these.
In most cases, you will have to use either one or two, depending on your environmental condition.
The good news is, you can use anti-scratch coating with all these technologies. That is, you can consolidate it with anti-glare, anti-graffiti, UV and abrasion resistant coating.
However, when it comes to anti-fog coating, the mode of application is slightly different. That is, you will apply anti-scratch and anti-fog coatings on opposite sides of the plastic. Therefore, you will end up with anti-fog coating on one side while anti-scratch coating on the other.
Note: For anti fog solutions,here is a ultimate guide of anti fog solutions which will solve all fogging problems.
In short, using more than one plastic coating technology will protect you from any environmental hazards.
Quality is an important aspect when choosing an anti-scratch coating for any application. They are the only substrates will stick permanently on the polycarbonate or acrylic surface.
Any plastic that fades or ceases to be effective after a short period of time will expose you to unnecessary risks. That is, the surface may begin to have scratches, thus, you will not see clearly. As a result, your safety will be compromised.
There is one way to solve this problem:
Buy all anti-scratch coating for plastics from reputable companies. Such companies adhere to the approved manufacturing standards. All their anti-scratch products are subjected to all the necessary tests for anti-scratch coating. These tests include:
For a fact, you may not be able to conduct these tests successfully on your own. This is because some require special equipment. It is for this reason that you need to go for reputable companies.
Anti-scratch coating for plastics are designed to last for years. However, due to unavoidable circumstances, they may cease to be effective. Under such circumstances, the surface could be susceptible to scratches.
Of course, such situations are covered in the product warranty. However, to be safe, you should be able to identify such circumstances in good time to avoid unnecessary accidents.
You can only achieve this if you conduct regular inspections on all safety equipment with anti-fog coating. So, regular inspection is also an important procedure when you want to ensure safety at the workplace.
5.Every Worker Must Wear a Safety Equipment with Anti-scratch Coating
There is no excuse why one should not wear a safety equipment with the right plastic coating. As mentioned earlier, anti-scratch coating can be consolidated with other technologies to guarantee safety.
Remember, there is the Occupational Safety and Health Act that stipulate what is expected of every worker. You must uphold these regulations at whatever cost.
Conclusion
It is the responsibility of every individual to ensure they have the right safety equipment. That is, one with anti-scratch coating for plastics plus additional technologies that guarantee safety.
]]>Anti-fog coating for polycarbonate Sheet or polycarbonate film is applicable in many fields such as commercial, industrial, thermal, electrical and medical. We offer a huge range of products that are applied further such as visor anti fog, replacement helmet lens, helmet face shield to provide an extra care to your face. Hence, you can work in a protected and care free environment.
Features of Anti-fog coating
-Have an affinity for water that is hydrophilic
– Chemical resistant
– Water washable
– Abrasion resistant
– Impact resistant
Anti-fog coating for polycarbonate film
Excelite offer Anti-fog properties on the anti-fog polycarbonate films. There is a single side coating for anti-fog polycarbonate film. The popular application of such films is mirrors, helmet visor, unglasses, etc. It has various features as scratch free, chemical free and impact free.
The consumers will have many advantages while using our anti-fog films like it is tinted, can be embossed, possess anti-static properties, and printable.
Anti-fog coating for polycarbonate sheet
Excelite anti-fog polycarbonate sheet is scratch resistant. It is available with us in different thickness. The anti-fog polycarbonate sheet is easy to maintain and clean and is available in various thicknesses, coated one side or two. The anti-fog film provides a smooth fog resistant surface. Even if it gets too humid, the anti-fog coating will not be spoiled. The surface is easily cleaned with the lens cleaner or the commercial cleaner.
The application of anti-fog film is common as anti-fog visor in helmet. There are various kinds of visor used in helmets in different ways. Few examples are motorcycle visor, bike visor, respiratory visor, paintball visor, football visor, hockey visor, pilot visor. Features associated with the anti fog visor are:-
-Scratch resistant
– Abrasion resistant
– Improved Fog resistance
– Improved optical clarity
– High protection
– Comfortable
– Good fit
-Provide clear view
The residents of cold countries may face the trouble of fog every time. It is very frustrating to see fog on the helmet visor or on the goggles as soon as you step out. It provides hurdle to the vision in the foggy conditions. Keeping situations in mind, Excelite is providing the anti-fog coating on the polycarbonate films and sheets.
Use of anti-fog Helmet visors, helmet face shields, replacement helmet lens is very prevalent. There are specifications that are mentioned on the specification sheets. These specifications sheets are available on our website. You can easily download the sheet that shows the anti-fog features.
Excelite provides an excellent anti-fog coating on its anti-fog polycarbonate sheets and anti-fog polycarbonate films. The coating does not fail in very damp and humid conditions. The anti-fog properties are well preserved. It can be cleaned by the commercial leans cleaner.
]]>
Providing quality products is important for the success of a new business. The new venture should satisfy the customer’s demands. It must bridge the gap that existed in the market.
One thing to put in mind is the fact that, any type of business will require commitment, dedication and working smartly.
Start a polycarbonate shop is the same,you need to consider too many factors,and below are 10 important factors you need to consider in the whole process for the new polycarbonate shop:
For effective running of a polycarbonate shop, the dealer should look for desirable, reliable and a cost effective source of the materials.
Take for instance, buying the polycarbonate panels and profiles from suppliers like Excelite ,bayer,sabic and so on.
It’s advisable for the dealer to do adequate research on the supplier available in the market before starting on the business.
With the research information the dealer will be able to make sound and effective decisions on the suppliers to contact and seek to develop a strong supplier relationship.
It’s also advisable to have a wide selection list of suppliers as this will help in ensuring availability of the materials as well as quality services from them and this is what you need to show your customers.
The polycarbonate business like any other business requires some amounts when starting. You need to have enough money to take you for several months. A new polycarbonate shop will not guarantee profits or returns within the first few months.
Despite all these, you will have to pay for the transportation, establishing the business and administrative costs. In short, you will have to inject more money in the polycarbonate sheet business to make good foundation.
It is important that you evaluate the sources of funds and some of the sources to consider include:
Here, you will have to exchange a section of the ownership of the business for financial investment in the polycarbonate business.
This involves permanent investment in the shop. These may include personal savings, borrowing from friends and relatives, venture capital, angel investors, government grants, etc.
This is where you borrow money with an aim of repaying it with the interest within a given period of time. You can approach friends and relatives or commercial lenders such as banks.
This gives you an opportunity to obtain the assets for the new polycarbonate shop without necessarily opting for debt or equity financing.
As you look for the source of funds, it’s important to consider the terms and conditions of repayment. It should not be one that will derail the new polycarbonate venture from expanding. If you have enough savings, then it will be better.
A polycarbonate shop should be situated in a place that its customers easily access it. It should be near areas where polycarbonates products are used.
Ideal places can be in towns where a large number will be ready to buy any of the products. You need to establish whether there is demand for the product or not.
For instance, in most high end places within towns, the demand for multiwall polycarbonate sheets is high. This is because they use them to make swimming pool covers,greenhouse,roofing etc. This could be a better location.
Opening a subsidiary company for the greenhouse polycarbonate panels can also be profitable. When you have a subsidiary company in such places, you will save on the transportation cost of the finished products. This will ensure that you deliver the products not only faster, but at a relatively cheaper cost.
It is also good to locate the shop near other shops that sell/ deal with other building materials or being close to other complementary shops.
This will help the consumers when they are doing their buying. For a polycarbonate shop, the customers are likely to need loading areas/ parking space.
It should be put into consideration when looking for a shops location.
In relation to the above, the shop should be in a good looking place- a good appearance. It is also good to note that a dealer should take care of the location’s regulations and legislation procedures as well. These laws can in a great way limit the growth and prosperity of the shop.
It is important to conduct an environmental impact assessment and get the necessary certificates to approve the construction of the polycarbonate shop.
This is very crucial if you would wish to conduct other processes such as shaping the polycarbonate sheets. It is also wise to have acceptable waste disposal procedures. Waste is inevitable and the best we can do is to adopt better waste disposal procedures.
Consumers look for unique products. The same known product sold in a slight different version than what is in the market.
In the already existing market, how are the corrugated, textured, sheets, embossed, multiwall or the solid carbonates sold?
Already, there are people doing this kind of business, so how will you ensure that you dominate this market?
Product differentiation and quality manufacturing process. The consumers should see this practically and they should be convinced.
There is no consumer who believe in rumors. The parent company must have a polycarbonate testing laboratories. Since polycarbonate panels is vulnerable to ultraviolet radiation, the consumer must be convinced beyond reasonable doubt that all polycarbonate are UV protected. They are also abrasion resistant.
Could they be repackaged or sold in smaller sizes or be sold to a customer’s specification?What is it that the polycarbonate customers need for them to feel satisfied? In order to make it in the polycarbonate market it would be advisable to understand the following:
1. The aggressiveness of the competition
2. the number of the competitors
This will help one equip him well before going into the market,the trade potential for various lines of trade in the polycarbonate market. All these will help your shop to stand out from the rest of your competitors.
A market analysis is crucial to a firm that would wish to succeed in the market. When you establish a shop without conducting market analysis then you should expect any prosperity.
In the polycarbonate shop the employee should be well informed of the products they are selling. Customers need someone with clear, concise information about the product they are being sold.
Employees can be a tool of helping in making large sales by making it known to consumers the large and versatile use of the products they stock.
The employees should be conversant with all the end products of polycarbonate sheets. That is, the swimming pool enclosures, greenhouses, roofing sheets or even as the sound barrier panels. This is crucial whenever a customer asks for a quote for a given finished product.
It is common to find that a customer wishes to construct a polycarbonate skylights, but he or she does not know the quantity of the sheets required. The employees should be able to give a correct quote of the same.
Polycarbonates require skills to install it in whichever place they are to be installed. A dealer can be linking customers with expert to help them installing them – the polycarbonates.
This will create to the customers a sense of being held highly and being thought of. They can also offer after sale service of transporting customers merchandise maybe within a radius of several kilometers from the shop.
You need to lay the foundation for this and conduct the feasibility studies here. Your customers will be happy if they buy a product from a shop and you offer to transport and install the sheets for them. It is a good way of expanding your territory, especially for a new shop.
All customers like to be impressed by the general look of a shop and the polycarbonate customers are no exemption.
All the merchandise that the shop is selling should be well shown to the customers. Additionally, materials relating to each other should be kept next to each other too.
You should show case the potential that is available in the polycarbonate shop. Try to display the photos of you past projects. You need to avail customer testimonials as well. This will make the consumers to have confidence in your shop.
Customers have become quite busy and they want to be supplied with information regarding their requirements even before they need it.
The shop need to conduct aggressive marketing to make it known to potential customers what they offer and where they are found.
This should be done through advertisement and promotional sale. In addition, online marketing will go a long way in increasing the company’s revenue and enlarging its client’s base.
The shop could also consider having an online store where it will be getting orders from the customers is responding to their directives.
In order to have a line to follow,it would be advisable to have a well laid down business plan to help as the vehicle to move on.
The plans will be the path through which the shop will be moving on and within it are the set / desirable goals for the shop.
The business plan should capture all the vital aspects of the business, from the supply, delivery and maintenance procedures.
All businesses have their share of a certain risk. If could be theft, fire or any other risk that can befall the polycarbonate shop.
For this reason it would be necessary to seek an insurance policy that would best fit the shop considering what is being stocked.
In summary, there are very many factors you need to consider before you contemplate of starting a new polycarbonate shop.
You need to consider all the factors above to ensure that the business gets a good foundation. When you ignore any of these factors, then you will be sure that the business may not do well in the future.
All factors mentioned above complement each other. You need to blend them together since they will ensure that the new shop is sustainable.
There are key issues highlighted in this article, first the availability of both the supply and demand. Where do you get the products and who are the targeted customers.
This narrows down to market research. Two, the availability of funds. The terms and condition must be friendly.
Lastly, is how can you run the enterprise. That is, take into account how you expect to distribute product and the after sales services.
The risk management skills also form a crucial aspect in this stage. With all these in mind, you will be having a higher probability of success.
This can be a difficult task, I must admit however, you can get advice from the polycarbonate experts. If you are going to purchase polycarbonates from Excelite, then company can equip you with some of these skills. Feel free to contact them.
Always remember this quote by Thomas Edison: The value of an idea lies in the using of it. I believe you have the right idea, what are you waiting for?
]]>
They are available in different configurations such as the transparent, tinted, multiwall and textured surfaces. These panels are durable, lightweight, self-extinguishing and virtually unbreakable.
This has been the main reason for the increased demand in the swimming pool cover construction. Choosing the right polycarbonate swimming pool covers can make all the difference on the experience you are going to have with your pool. So, what are the secrets behind all these?
This is what you need to know:
This could be a perfect choice if you’re that person who would wish to have a longer swimming season. You don’t need to worry about any change in seasons.
You’ll enjoy the warm water in your swimming pool both during the early and late swimming seasons. The snow is never a problem since the pool remains covered during these seasons.
Why suffer from minor bacterial infections or use a lot of chemicals to treat the swimming? It doesn’t matter the brand of chemicals you buy, you’ll lose the battle without the pool covers. The degree of infection will increase and the bacteria and algae will multiply faster.
Constructing the swimming pool near trees and flowers is such a thrilling experience. But, do you know that the leaves from these plants can be such a nuisance?
Of course, you can’t stop the leaves from falling and being blown away by wind. This is yet, another reason why you need a swimming pool cover.
Can you imagine sitting around the swimming pool trying to keep birds and animals away from the pool? This could be a waste of your precious time.
Without a polycarbonate swimming pool cover, accidents are be inevitable. The cover will prevent pets, kids or wild animals from falling in the pool.
The retractable pool covers play a fundamental role here. You can visit our store for some of the thrilling and modern pool designs. It will also be safely secured so that children do not stray and fall into the pool.
They are impenetrable allowing children to play around them without the possibility of an accident happening. The covers do not need cleaning as once they are drawn back the leaves and debris which had collected on top fall off.
Evaporation is a common phenomenon in pools without the right covers. The pool’s water evaporates more than twice the pool’s volume every year. This means a lot of water gets saved when polycarbonate covers are used. This saves on the budget.
These covers are also essential for the indoor swimming pools. Moisture facilities rusting, thus, if this moisture escapes to the interior of your house then expect nothing but, rust in metallic sections.
The cover will confine all the moisture within the pool. Again, there’ll be no need to worry about excess moisture within your house.
The multi-wall polycarbonate swimming pool covers have good insulation properties. This ensures that the pool temperature does not fluctuate during extreme weather conditions. The covers are made such that they completely cover the pool and do not allow for loss of heat.
The solar covers transfer the heat of the sun to the pool water so that the moment there is sun your water is heated. This saves a lot on energy as you will not need to use any other form of heating.
The modern swimming pool covers are UV protected. This reduces the sunburn and ensures that the polycarbonate sheet has a longer service life. They are also easy to operate, it is just on and off switch and the pool cover will move in the direction you desire. You can choose from the wide range of designs available in our stores.
It is quite clear that you need to install a swimming pool cover in case you’d to benefit from all the factors listed above. These are simple processes but can cost you a lot of dollars as far as pool maintenance is concerned. We can offer a perfect solution to all your swimming pool problems.
Check how much you need to cost for a swimming pool enclosure now.
Contact us today, and we’ll make your dream pool a reality.
]]>These films are used in a wide range of applications such as in menu boards, coating, dial indicators, etc.
Excelite uses the ultramodern technology, which makes their films unique and superior to polycarbonate products in the market.
Zhejiang, March 10, 2015 – Excelite Plastic Co., L.T.D. announced that they’ll be venturing in a new processing technique which is meant to improve the quality of polycarbonate films.
This is could be another breakthrough for this company after it had launched a series of corrugated polycarbonate sheets.
The Asian region has become a hub for polycarbonate commercial construction. The aesthetic appearance and protection of a structure’s occupants has become a major area of concern for most architects.
The high performance films will offer maximum protection and ensure security as well. They have also indicated that they’ll be bringing major automotive companies onboard who want to make bullet proof windscreens.
“For the period we’ve been in the polycarbonate industry, we believe that our clients’ needs are so dynamic that we have to adopt the most sophisticated and advanced technology,” said Sunny Sun who’s the Excelite Plastics Marketing Manager.
“This technology has enabled our polycarbonate films meet most of our customer requirements such as energy efficiency, safety, security and attractive appearance,” he added.
The new Excelite’s polycarbonate plastic will meet the following criteria: lightweight, optimal light transmission, blast resistant, meet the energy efficiency standards, eco-friendly, impact resistance and chemical resistance.
They’ve promised to introduce other new polycarbonate films before the end of the year.
This will be after the R & D shall have complied their research about their customer needs and expectations.
“Our loyal customers have been very useful in our product development cycle and we work very closely with them before we introduce any new product in the market,” said Sunny in their last interview.
Excelite Plastics L.T.D is one of the leading suppliers of high-performance polycarbonate products in China and other parts of the world.
It serves the following segment of the market with the polycarbonate sheets/panels: leisure, automotive, sports, medical, electronics and construction industries.
For any quotation,please visit www.exceliteplas.com
[mc4wp_form] ]]>
You can get a complete line of acrylic LGP which are suitable for virtually any application. They are transparent acrylic panels which are manufactured from pure Poly (methyl methacrylate) (PMMA) resin.
The bottom section of this equipment has a dot matrix printed on the surface or a line matrix which has been scratched.
Most LGPs are designed with lighting systems on their edges. As a result, they can distribute light which comes from a primary source over the upper section of the acrylic panel.
The main ideas behind the construction of LGP are: to ensure that there’s optimal uniformity in the light which is being transmitted, to reorient the dot light source and to make the backlight slim.
The primary sources of light may include decoration lamp, fluorescent lamp, etc.
A number of light guide panels are ultra slim and they can be customized to meet the customer’s specific requirements.
The available LGPs tend to explore the optically refined dot pattern technology, which is used to transform an acrylic panel to an illuminate and becomes LGP.
The good thing about the PMMA resin is that the transmission of light is always at its best all the time.
They come in different configurations depending on both the shape and the size of the panel since this will determine the design of the dots.
For instance, for a white reflector, the dots are widely spread and smaller in size on regions which are closer to the source of light.
The light guide panels have the following key features: reduced energy consumption, a maintenance free operation, they can be installed faster due to the super slim designs, they are eco-friendly, possess an optional lighting control and an optimal lumen output can be achieved easily.
[mc4wp_form] ]]>
However, there are specific reasons why most people tend to go for the dome skylights as opposed to the existing shapes. The choice of material also plays a significant role.
The most common types of skylight are constructed using glass, acrylic or polycarbonates. The choice of material will depend on both the desired shape of the skylight and the intrinsic properties of materials in question.
For instance, glass is mainly used to construct flat skylight while polycarbonate and acrylic panels are used to construct dome skylights.
For applications which require robust and impact resistant materials, a polycarbonate sheet is always a perfect choice.
Normally, the dome skylights are mainly designed to protect the interior from inclement weather and they can “wash themselves” when it’s raining.
Their shape makes them immune to any problem which may be due to water pooling.
These skylights can be constructed using double wall polycarbonates, which improve the degree of heat retention and they can be embossed to improve the light diffusion property.
These structures have gained popularity due to their unique shapes. They can be used to provide ventilation, light, easy access to the roof and fight fire into residential, commercial and industrial buildings.
They can be incorporated in new structures and those that are being renovated.
Skylights can be installed in virtually all structures as long as the panel to be used, be it glass, polycarbonates or acrylic meet the required standards in the construction industry.
These skylights come in a wide range of shapes, sizes and colours.
They are designed to suit virtually all applications and to meet the desired application requirements. To realize a stunning skylight, it is advisable to consult a polycarbonate or acrylic sheet specialist.
That is, when you intend to use either of the materials to construct the skylight.
For individuals who treasure uniqueness of the overall structure, they can always opt for customized designs. Such designs are associated with unusual lighting effects which give them an appealing look.
Like other skylight structures, the dome types are also associated with significant energy savings. When the right panel is used in the construction, a substantial amount of light can be transmitted through the panel and there’ll no need of using light during the day.
Alternatively, material with a good R and U values will reduce energy consumption significantly. This is because there will be no need of heating the room during cold season. The multi-wall sheets are commonly used.
Reduced cost; a number of dome skylights are pre-assembled which makes the installation process easier. This reduces the on-site costs significantly.
Ideally, the dome shape has a number of advantages to the structure itself. Its positive curb frame seal protects it from being damaged by wind, dust, snow or rain.
They are designed with a pliable seal which allows for free expansion and contraction as the environmental temperature changes.
A number of dome skylights are constructed using products which can resist hazing, loss of strength and discoloration.
This is the main reason why acrylic and polycarbonate skylights are common. In addition to these key qualities, they also meet the fire code requirements, though one needs to be cautious when using the acrylic domes.
[mc4wp_form] ]]>
This is due to its versatile nature and the ability to fabricate it to virtually any shape.
The complex architectural designs, automotive parts, safety gears, transportation and shipping containers are manufactured from polycarbonate sheet.
The polycarbonate materials are popular for their superior physical and chemical properties such as impact resistance, superior optical properties, lightweight, high tensile strength, resistance to chemicals, etc.
In fact, some of the most amazing outdoor products that are durable and strong are actually manufactured from polycarbonate.
Here are 5 amazing outdoor products made from polycarbonate sheets:
Polycarbonate swimming pool enclosure is an important safety accessory.
Most swimming pool enclosures are actually constructed from extruded aluminum rods and solid polycarbonate sheets. They are strong to withstand high load capacities (900kg distributed with a 1.5m radius) and strong wind (wind speed of 230km/hr.).
These swimming pools are designed for snow, tornado or hurricane prone areas such as Alberta Canada or Texas, U.S.A.
The pool enclosures are available in different designs and shapes.
At the moment, the pool enclosure cost has reduced by over 45%. You can get a low profile swimming pool enclosure for as low as $2,999.
Of course, the enclosure will not only extend the swimming season, but offer several benefits such reducing maintenance cost.
Depending on your house’s architectural design, you can choose a roofing style that adds value and a sense of beauty to your home.
Ski goggles are injection molded polycarbonate safety accessories designed to guarantee better optical properties. The goggles are impact resistant and shatterproof.
Depending on the quality grade, they may have more than three polycarbonate coatings.
These may include anti-fog, anti-scratch, anti-glare and photochromic coating. In most cases, the anti-scratch and anti-glare coating may be consolidated.
That is, you may apply them to the outer surface of the racing goggles. The anti-fog coating is usually applied to the inner section of the goggles.
Even though most companies focus on standard designs, customized options are also available for OEM clients. The polycarbonate goggles can be designed to any shape since it is easier to fabricate polycarbonate sheets.
With polycarbonate sheets, you will get a transparent, flexible and unbreakable skateboard.
The polycarbonate skateboards are superior to the wooden types, making them the first choice for sporting enthusiasts. This is due to a wide range of factors such as:
The polycarbonate skateboards. In fact, since 2012, the sporting industry is mainly dominated with polycarbonate skateboards.
Photochromic visor is yet another polycarbonate products that guarantee unmatched safety and convenience.
The visors have a unique property – as the surrounding light changes, the visor begins to tint automatically.
This implies that, you don’t have to replace the visor whenever you transition from one environment to the other.
The visors have a photochromic coating on injection molded polycarbonate visors. This coating is very sensitive to any changes in the UV radiation, thus it adjusts accordingly.
To make it more functional, the photochromic visors may have anti-fog, anti-scratch or iridium coating.
Bullet proof panels are polycarbonate surfaces that are resistant to high impact, lightweight with superior optical properties.
They are mainly used in penal institutions, banks, security vehicles, police anti-riot equipment, etc.
The ability to resist bullet penetration is an inherent property of polycarbonate sheet that makes it a perfect choice for this task.
To provide better penetration resistance, others are designed with multilayers.
As a matter of fact, polycarbonate sheets play an integral role in our day-to-day lives with innovative products introduced each month.
It doesn’t matter whether you are looking for sporting equipment, architectural structures, advertisement sign post or safety shield; you will get one that meets your specific needs.
Of course, there are thousands of products made of polycarbonate sheets , like automatic capsule filling machines,helmets,windshield etc.
If anything Excelite can help with your business, freely contact our support team.
]]>Polycarbonate plastic is known for its high-performance,lightweight and the ability to balance between optical clarity, optical resistance, toughness, heat resistance and dimension stability.
These are some of the main reasons why they are commonly used to manufacture a number of glazing sheets and panels. The Bisphenol A (BPA) is the main building block of the polycarbonate plastic.
The available plastics can be classified as either thermosetting or thermoplastic plastics. The two types of plastics have unique features which make them suitable for different applications.
Thermoplastics are plastics which can be heated to pliable temperature after which they can be formed to take the desired shape.
This process can be repeated severally without altering the fundamental properties of the polymer. Some unique properties which are unique to these materials include:
When these plastics are exposed to a high degree of temperature, they can soften which make them difficult to prototype.
On the other hand, a thermoset is a polymeric which undergoes an irreversible chemical process after it has cured.
It has a number of cross-linking which hinders molecular chain movement after it has cured. From the above definition, is polycarbonate a thermoplastic or thermosetting plastic?
Apart from the superlative properties that the polycarbonate sheets possess, this product is considered eco-friendly since it can be recycled.
A number of polycarbonate sheets/panels have been manufactured from recycled products. Polycarbonate are thermoplastics since they can be thermoformed severally without losing their desirable properties. They do not have cross linkages in their structure which can hinder them from being thermoformed a number of times. It is for this reason that polycarbonate sheets are widely used as glazing sheets.
The polycarbonate sheets which have been manufactured from virgin materials are more expensive than those that have been manufactured from the recycled materials.
Ideally, being that polycarbonates are thermoplastics, most companies have been shifting to green manufacturing process.
A number of organization are forcing the polycarbonate manufacturing companies to focus on recycling polycarbonate products. The polycarbonate sheets which are manufactured through extrusion have between 10 and 40% recycled materials.
The recycled raw materials are obtained from regrinding scrap or damaged polycarbonate sheets.However , in the PC market , it is different , most distributor need pure 100% new virgin materials,because the sheets will be used for the application like greenhouse,swimming pool cover ,roofing and some like these .
To conserve the environment, a number of polycarbonate sheets are manufactured in such a way that they can be 100% recyclable.
That is, after they’ve been used, they can be taken to the recycling centers to be used to make new sheets which can used for glazing purposes.
Other than reducing the amount of waste plastics within the environment, these polycarbonate sheets have also revolutionized the architectural market.
The modern buildings use polycarbonate glazing panels due to their lightweight and durability. The multi-wall polycarbonates have also gained popularity in design applications due to the enhanced insulation properties.
The multi-wall polycarbonate sheets can be manufactured from recycled materials too. They have improved the overall aesthetic spaces of buildings.
[mc4wp_form] ]]>